Adding / Swapping Bits in Tool Change Rack

• Choose collet corresponding to bit shank diameter
  • Collet size engraved on front face
  • 1/8”, 1/4”, 3/8”, 1/2” imperial sizes available
  • 4mm, 6mm, 8mm metric sizes available
• Tighten bit in collet by hand (clockwise)
  • All cutting flutes should be below collet
  • The bit shank should be inserted a minimum of 2/3 (100% ideal) of the collet length
    • For example, a 1.5” length collet requires at least 1” of bit shank inserted, however ideal insert length is 1.5”
• Finish tightening bit in collet using “ER 32” wrench & CNC tool mount bracket
• Press & hold green button on side of spindle
• 
• Position tool holder under spindle head
• Release green button

• On the CNC screen, update the “current tool” number to reflect which tool position the new bit will be physically located in
• Park tool
• Execute “Automatic Touchoff”
• Update Fusion cloud tool library to reflect new tool numbering